Все выпуски
- 2026 Том 18
- 2025 Том 17
- 2024 Том 16
- 2023 Том 15
- 2022 Том 14
- 2021 Том 13
- 2020 Том 12
- 2019 Том 11
- 2018 Том 10
- 2017 Том 9
- 2016 Том 8
- 2015 Том 7
- 2014 Том 6
- 2013 Том 5
- 2012 Том 4
- 2011 Том 3
- 2010 Том 2
- 2009 Том 1
-
Численное моделирование внешнего обтекания спортсмена
Компьютерные исследования и моделирование, 2017, т. 9, № 2, с. 331-344В работе описывается численное моделирование процесса внешнего обтекания подвижного спортсмена с целью определения его интегральных характеристик при различных режимах набегающего потока и режимах его движения. Численное моделирование выполнено с помощью программного комплекса вычислительной гидродинамики FlowVision, построенного на решении набора уравнений, описывающих движение жидкости и/или газа в расчетной области, в том числе уравнений сохранения массы, импульса и энергии, уравнений состояния, уравнений моделей турбулентности. Также учитываются подвижные границы расчетной области, изменяющаяся геометрическая форма которых моделирует фазы движения спортсмена, при прохождении трассы. Решение системы уравнений выполняется на декартовой сетке с локальной адаптацией в области высоких градиентов давлений или сложной геометрической формы границы расчетной области. Решение уравнений выполняется с помощью метода конечных объемов, с использованием расщепления по физическим процессам. Разработанная методика была апробирована на примере спортсменов, совершающих прыжки на лыжах с трамплина, в рамках подготовки к Олимпиаде в Сочи в 2014 году. Сравнение результатов численного и натурного эксперимента показало хорошую корреляцию. Технология моделирования состоит из следующих этапов:
1) разработка постановки задачи внешнего обтекания спортсмена в обращенной постановке, где неподвижный объект исследования обтекается набегающим потоком, со скоростью, равной скорости движения объекта;
2) разработка технологии изменения геометрической формы границы расчетной области в зависимости от фазы движения спортсмена; разработка методики численного моделирования, включающей в себя определение дискретизации по времени и пространству за счет выбора шага интегрирования и измельчения объемной расчетной сетки;
3) проведение серии расчетов с использованием геометрических и динамических данных спортсмена из сборной команды.
Описанная методика универсальна и применима для любых других видов спорта, биомеханических, природных и подобных им технических объектов.
Numerical simulation of sportsman's external flow
Computer Research and Modeling, 2017, v. 9, no. 2, pp. 331-344Просмотров за год: 29.Numerical simulation of moving sportsman external flow is presented. The unique method is developed for obtaining integral aerodynamic characteristics, which were the function of the flow regime (i.e. angle of attack, flow speed) and body position. Individual anthropometric characteristics and moving boundaries of sportsman (or sports equipment) during the race are taken into consideration.
Numerical simulation is realized using FlowVision CFD. The software is based on the finite volume method, high-performance numerical methods and reliable mathematical models of physical processes. A Cartesian computational grid is used by FlowVision, the grid generation is a completely automated process. Local grid adaptation is used for solving high-pressure gradient and object complex shape. Flow simulation process performed by solutions systems of equations describing movement of fluid and/or gas in the computational domain, including: mass, moment and energy conservation equations; state equations; turbulence model equations. FlowVision permits flow simulation near moving bodies by means of computational domain transformation according to the athlete shape changes in the motion. Ski jumper aerodynamic characteristics are studied during all phases: take-off performance in motion, in-run and flight. Projected investigation defined simulation method, which includes: inverted statement of sportsman external flow development (velocity of the motion is equal to air flow velocity, object is immobile); changes boundary of the body technology defining; multiple calculations with the national team member data projecting. The research results are identification of the main factors affected to jumping performance: aerodynamic forces, rotating moments etc. Developed method was tested with active sportsmen. Ski jumpers used this method during preparations for Sochi Olympic Games 2014. A comparison of the predicted characteristics and experimental data shows a good agreement. Method versatility is underlined by performing swimmer and skater flow simulation. Designed technology is applicable for sorts of natural and technical objects.
-
Новый метод стилеметрии на основе статистики числительных
Компьютерные исследования и моделирование, 2017, т. 9, № 5, с. 837-850Предложен новый метод статистического анализа текстов. Исследовано распределение частот различных первых значащих цифр в числительных англоязычных текстов. Учитываются количественные и порядковые числительные, выраженные как цифрами, так и словесно. Предварительно из текста удаляются случайно попавшие в него числительные, не отражающие авторский замысел (номера страниц, маркеры списков, идиоматические выражения, устойчивые обороты речи и тому подобное). Обнаружено, что для сборных текстов разного авторства частоты первых значащих цифр приближенно соответствуют известному закону Бенфорда, но с резким преобладанием встречаемости единицы. В связных авторских текстах возникают характерные отклонения от закона Бенфорда; показано, что эти отклонения являются статистически устойчивыми и значимыми авторскими особенностями, позволяющими при определенных условиях ответить на вопрос об авторстве и различить тексты разных авторов. Требуется, чтобы текст был достаточно длинным (не менее чем порядка 200 кБ). Распределение первых значащих цифр конца ряда $\{1, 2, \ldots, 8, 9\}$ подвержено сильным флуктуациям и не показательно для нашей цели. Цель теоретического обоснования найденной эмпирической закономерности в работе не ставится, но продемонстрировано ее практическое использование для атрибуции текстов. Предлагаемый подход и сделанные выводы подкреплены примерами компьютерного анализа художественных текстов У. М. Теккерея, М. Твена, Р. Л. Стивенсона, Дж.Джойса, сестер Бронте, Дж.Остин. На основе разработанной методологии рассмотрены проблемы авторства текста, ранее приписывавшегося Л.Ф. Бауму (результат согласуется с полученным другими методами), а также известного романа Харпер Ли «Убить пересмешника»; показано, что к написанию первоначального варианта этой книги («Пойди, поставь сторожа») мог быть причастен Трумен Капоте, но финальный текст, вероятно, принадлежит Харпер Ли. Результаты подтверждены на основе параметрического критерия Пирсона, а также непараметрических U-критерия Манна–Уитни и критерия Крускала–Уоллиса.
Ключевые слова: атрибуция текстов, первая значащая цифра числительных.
A novel method of stylometry based on the statistic of numerals
Computer Research and Modeling, 2017, v. 9, no. 5, pp. 837-850A new method of statistical analysis of texts is suggested. The frequency distribution of the first significant digits in numerals of English-language texts is considered. We have taken into account cardinal as well as ordinal numerals expressed both in figures, and verbally. To identify the author’s use of numerals, we previously deleted from the text all idiomatic expressions and set phrases accidentally containing numerals, as well as itemizations and page numbers, etc. Benford’s law is found to hold approximately for the frequencies of various first significant digits of compound literary texts by different authors; a marked predominance of the digit 1 is observed. In coherent authorial texts, characteristic deviations from Benford’s law arise which are statistically stable significant author peculiarities that allow, under certain conditions, to consider the problem of authorship and distinguish between texts by different authors. The text should be large enough (at least about 200 kB). At the end of $\{1, 2, \ldots, 9\}$ digits row, the frequency distribution is subject to strong fluctuations and thus unrepresentative for our purpose. The aim of the theoretical explanation of the observed empirical regularity is not intended, which, however, does not preclude the applicability of the proposed methodology for text attribution. The approach suggested and the conclusions are backed by the examples of the computer analysis of works by W.M. Thackeray, M. Twain, R. L. Stevenson, J. Joyce, sisters Bront¨e, and J.Austen. On the basis of technique suggested, we examined the authorship of a text earlier ascribed to L. F. Baum (the result agrees with that obtained by different means). We have shown that the authorship of Harper Lee’s “To Kill a Mockingbird” pertains to her, whereas the primary draft, “Go Set a Watchman”, seems to have been written in collaboration with Truman Capote. All results are confirmed on the basis of parametric Pearson’s chi-squared test as well as non-parametric Mann –Whitney U test and Kruskal –Wallis test.
Keywords: text attribution, first significant digit of numerals.Просмотров за год: 10. -
Моделирование межрегиональных миграционных потоков клеточными автоматами
Компьютерные исследования и моделирование, 2020, т. 12, № 6, с. 1467-1483В статье исследуется проблема разработки и обоснования наиболее адекватного инструментария для прогнозирования величины и структуры межрегиональных миграционных потоков. Миграционные процессы оказывают значительное влияние на численность и демографическую структуру населения территорий, состояние и сбалансированность региональных и локальных рынков труда. Для анализа миграционных процессов и оценки их последствий необходим экономикоатематический инструментарий, позволяющий с необходимой точностью моделировать миграционные процессы и потоки для различных территорий. Рассмотрены существующие подходы и методы моделирования миграционных процессов с анализом их преимуществ и недостатков. Отмечается, что для реализации многих из этих методов необходим большой массив агрегированных статистических данных, который не всегда имеется в наличии и не характеризует поведение мигрантов на локальном уровне, на котором принимается решение о переезде на новое место жительства. Это существенно влияет на возможность применения соответствующих методов моделирования миграционных процессов и точность прогнозов величины и структуры миграционных потоков.
В работе разработана и апробирована на данных Приморского края модель клеточного автомата для моделирования межрегиональных миграционных потоков, реализующая интеграцию модели миграционного поведения домашних хозяйств в условиях ограниченной рациональности в общую модель миграционного потока территории. Для реализации модели миграционного поведения домашних хозяйств в условиях ограниченной рациональности предложен интегральный индекс привлекательности регионов с экономической, социальной и экологической составляющими. Для оценки прогностической способности разработанной модели проведено ее сравнение с существующими моделями клеточных автоматов, используемыми для прогнозирования межрегиональных миграционных потоков. Для этих целей был использован метод вневыборочного прогнозирования, который показал статистически значимое превосходство предложенной модели, которая позволяет получать прогнозы и количественные характеристики миграционных потоков территорий на основе реального миграционного поведения домашних хозяйств на локальном уровне с учетом условий их проживания и поведенческих мотивов.
Ключевые слова: миграционные потоки, модели, сравнительный анализ, клеточные автоматы, ограниченная рациональность, точность прогноза.
Modelling interregional migration flows by the cellular automata
Computer Research and Modeling, 2020, v. 12, no. 6, pp. 1467-1483The article dwells upon investigating the issue of the most adequate tools developing and justifying to forecast the interregional migration flows value and structure. Migration processes have a significant impact on the size and demographic structure of the population of territories, the state and balance of regional and local labor markets.
To analyze the migration processes and to assess their impact an economic-mathematical tool is required which would be instrumental in modelling the migration processes and flows for different areas with the desired precision. The current methods and approaches to the migration processes modelling, including the analysis of their advantages and disadvantages, were considered. It is noted that to implement many of these methods mass aggregated statistical data is required which is not always available and doesn’t characterize the migrants behavior at the local level where the decision to move to a new dwelling place is made. This has a significant impact on the ability to apply appropriate migration processes modelling techniques and on the projection accuracy of the migration flows magnitude and structure.
The cellular automata model for interregional migration flows modelling, implementing the integration of the households migration behavior model under the conditions of the Bounded Rationality into the general model of the area migration flow was developed and tested based on the Primorye Territory data. To implement the households migration behavior model under the conditions of the Bounded Rationality the integral attractiveness index of the regions with economic, social and ecological components was proposed in the work.
To evaluate the prognostic capacity of the developed model, it was compared with the available cellular automata models used to predict interregional migration flows. The out of sample prediction method which showed statistically significant superiority of the proposed model was applied for this purpose. The model allows obtaining the forecasts and quantitative characteristics of the areas migration flows based on the households real migration behaviour at the local level taking into consideration their living conditions and behavioural motives.
-
Мультирежимная модель и численный алгоритм расчета квазитрещин различного типа при циклическом нагружении
Компьютерные исследования и моделирование, 2022, т. 14, № 4, с. 873-885На основе мультирежимной двухкритериальной модели усталостного разрушения предложен метод расчета зарождения и развития узкихлок ализованных зон поврежденности в образцах и элементах конструкций для различных режимов циклического нагружения. Такие узкие зоны повреждаемости можно рассматривать как квазитрещины двухтипов, соответствующих механизму нормального отрыва и сдвига. Проведена верификация модели путем численных экспериментов по воспроизведению левыхи правыхв етвей усталостных кривых для образцов из титановыхи алюминиевых сплавов, построенных по испытаниям при различных условиях и схемах циклического нагружения. Приведены примеры моделирования развития квазитрещин двухтипов (нормального отрыва и сдвига) при различных режимах циклического нагружения пластины с отверстием в качестве концентратора напряжений. При сложном напряженном состоянии в предлагаемой комплексной модели возможна естественная реализация любого из рассмотренных механизмов развития квазитрещин. Квазитрещины разных типов могут развиваться в разных частях образца, в том числе одновременно.
Ключевые слова: усталостное разрушение, многоцикловая усталость, сверхмногоцикловая усталость, мультирежимная модель, уравнение повреждаемости, критерий разрушения, квазитрещина.
Multi regime model and numerical algorithm for calculations on various types quasi crack developing under cyclic loading
Computer Research and Modeling, 2022, v. 14, no. 4, pp. 873-885A new method for calculating the initiation and development of narrow local damage zones in specimens and structural elements subjected to various modes cyclic loadings is proposed based on multi regime two criteria model of fatigue fracture. Such narrow zones of damage can be considered as quasi-cracks of two different types, corresponding to the mechanism of normal crack opening and shear.
Numerical simulations that are aimed to reproduce the left and right branches of the full fatigue curves for specimens made from titanium and aluminum alloy and to verify the model. These branches were constructed based on tests results obtained under various modes and cyclic loading schemes. Examples of modeling the development of quasi-cracks for two types (normal opening and shear) under different cyclic loading modes for a plate with a hole as a stress concentrator are given. Under a complex stress state in the proposed multi regime model, a natural implementation of any considered mechanisms for the quasi-cracks development is possible. Quasi-cracks of different types can develop in different parts of the specimen, including simultaneously.
-
Моделирование транспортных потоков на основе квазигазодинамического подхода и теории клеточных автоматов с использованием суперкомпьютеров
Компьютерные исследования и моделирование, 2024, т. 16, № 1, с. 175-194Целью исследования являются моделирование динамики автотранспортных потоков на транспортных сетях мегаполисов и систематизация современного состояния дел в этой области. Во введении указывается, что на первый план выходит развитие интеллектуальных транспортных систем, которые становятся неотъемлемой частью современных транспортных технологий. Основным ядром таких систем являются адекватные математические модели, максимально приближенные к реальности. Отмечается, что в связи с большим объемом вычислений необходимо использование суперкомпьютеров, следовательно, создание специальных пар аллельных алгоритмов. В начале статьи приводится современная классификация моделей, обсуждаются отличительные особенности каждого класса со ссылками на соответствующие примеры. Далее основное внимание уделяется созданным авторами статьи разработкам в области как макроскопического, так и микроскопического моделирования и определению места этих разработок в приведенной выше классификации. Макроскопическая модель основана на приближении сплошной среды и использует идеологию квазигазодинамических систем уравнений. Указаны ее достоинства по сравнению с существующими моделями этого класса. Система уравнений модели представлена как в одномерном варианте, но с возможностью исследования многополосного движения, так и в двумерном варианте, с введением понятия боковой скорости, то есть скорости перестроения из полосы в полосу. Второй вариант позволяет проводить вычисления в расчетной области, соответствующей реальной геометрии дороги. Представлены тестовые расчеты движения по дороге с локальным расширением и по дороге с системой светофоров с различными светофорными режимами. Расчеты позволили в первом случае сделать интересные выводы о влиянии расширения на пропускную способность дороги в целом, а во втором случае — выбрать оптимальный режим для получения эффекта «зеленой волны». Микроскопическая модель основана на теории клеточных автоматов и однополосной модели Нагеля – Шрекенберга и обобщена авторами на случай многополосного движения. В модели реализованы различные поведенческие стратегии водителей. В качестве теста моделируется движение на реальном участке транспортной сети в центре г. Москвы. Причем для грамотного прохождения транспортных узлов сети в соответствии с правилами движения реализованы специальные алгоритмы, адаптированные для параллельных вычислений. Тестовые расчеты выполнены на суперкомпьютере К-100 ЦКП ИПМ им. М. В. Келдыша РАН.
Ключевые слова: интеллектуальные транспортные системы, теория транспортныхп отоков, макроскопические и микроскопические модели, квазигазодинамическая система уравнений, клеточные автоматы, многополосное движение, параллельные вычисления.
Simulation of traffic flows based on the quasi-gasdynamic approach and the cellular automata theory using supercomputers
Computer Research and Modeling, 2024, v. 16, no. 1, pp. 175-194The purpose of the study is to simulate the dynamics of traffic flows on city road networks as well as to systematize the current state of affairs in this area. The introduction states that the development of intelligent transportation systems as an integral part of modern transportation technologies is coming to the fore. The core of these systems contain adequate mathematical models that allow to simulate traffic as close to reality as possible. The necessity of using supercomputers due to the large amount of calculations is also noted, therefore, the creation of special parallel algorithms is needed. The beginning of the article is devoted to the up-to-date classification of traffic flow models and characterization of each class, including their distinctive features and relevant examples with links. Further, the main focus of the article is shifted towards the development of macroscopic and microscopic models, created by the authors, and determination of the place of these models in the aforementioned classification. The macroscopic model is based on the continuum approach and uses the ideology of quasi-gasdynamic systems of equations. Its advantages are indicated in comparison with existing models of this class. The model is presented both in one-dimensional and two-dimensional versions. The both versions feature the ability to study multi-lane traffic. In the two-dimensional version it is made possible by introduction of the concept of “lateral” velocity, i. e., the speed of changing lanes. The latter version allows for carrying out calculations in the computational domain which corresponds to the actual geometry of the road. The section also presents the test results of modeling vehicle dynamics on a road fragment with the local widening and on a road fragment with traffic lights, including several variants of traffic light regimes. In the first case, the calculations allow to draw interesting conclusions about the impact of a road widening on a road capacity as a whole, and in the second case — to select the optimal regime configuration to obtain the “green wave” effect. The microscopic model is based on the cellular automata theory and the single-lane Nagel – Schreckenberg model and is generalized for the multi-lane case by the authors of the article. The model implements various behavioral strategies of drivers. Test computations for the real transport network section in Moscow city center are presented. To achieve an adequate representation of vehicles moving through the network according to road traffic regulations the authors implemented special algorithms adapted for parallel computing. Test calculations were performed on the K-100 supercomputer installed in the Centre of Collective Usage of KIAM RAS.
-
Поиск точек разладки в биометрических данных: ретроспективные непараметрические методы сегментации на основе динамического программирования и скользящих окон
Компьютерные исследования и моделирование, 2024, т. 16, № 5, с. 1295-1321Работа посвящена анализу медико-биологических данных, получаемых с помощью локомоторных тренировок и тестирований космонавтов, проводимых как на Земле, так и во время полета. Данные эксперименты можно описать как движение космонавта по беговой дорожке согласно прописанному регламенту в различных скоростных режимах, во время которых не только записывается скорость, но и собирается ряд показателей, включающих частоту сердечных сокращений, величину давления на опору и пр. С целью анализа динамики состояния космонавта на протяжении длительного времени, для независимой оценки целевых показателей необходимо проводить качественную сегментацию режимов его движения. Особую актуальность данная задача приобретает при разработке автономной системы жизнеобеспечения космонавтов, которая будет действовать без сопровождения персонала с Земли. При сегментации целевых данных сложность заключается в наличии различных аномалий, включая отход испытуемого от заранее прописанного регламента, переходы между режимами движения произвольного вида и длительности, аппаратные сбои и пр. Статья включает в себя подробный обзор ряда современных ретроспективных (оффлайн) непараметрических методов поиска многократных разладок во временном ряде, где под разладкой понимается резкое изменение свойств наблюдаемого ряда, происходящее в неизвестный заранее момент времени. Особое внимание уделено алгоритмам и статистическим показателям, которые определяют степень однородности данных, а также способам поиска точек разладки. В данной работе рассматриваются подходы, основанные на методах динамического программирования и скользящего окна. Вторая часть статьи посвящена численному моделированию представленных методов на характерных примерах экспериментальных данных, включающих как простые, так и сложные скоростные профили движения. Проведенный анализ позволил выделить методы, которые в дальнейшем будут проанализированы на полном корпусе данных. Предпочтение отдается методам, обеспечивающим близость разметки к заданному эталону, потенциально позволяющим детектировать обе границы переходных процессов, а также обладающим робастностью относительно внутренних параметров.
Ключевые слова: космическая медицина, локомоторное тестирование, временные ряды, точка разладки, сегментация, непараметрический, ретроспективный, динамическое программирование, скользящее окно.
Changepoint detection in biometric data: retrospective nonparametric segmentation methods based on dynamic programming and sliding windows
Computer Research and Modeling, 2024, v. 16, no. 5, pp. 1295-1321This paper is dedicated to the analysis of medical and biological data obtained through locomotor training and testing of astronauts conducted both on Earth and during spaceflight. These experiments can be described as the astronaut’s movement on a treadmill according to a predefined regimen in various speed modes. During these modes, not only the speed is recorded but also a range of parameters, including heart rate, ground reaction force, and others, are collected. In order to analyze the dynamics of the astronaut’s condition over an extended period, it is necessary to perform a qualitative segmentation of their movement modes to independently assess the target metrics. This task becomes particularly relevant in the development of an autonomous life support system for astronauts that operates without direct supervision from Earth. The segmentation of target data is complicated by the presence of various anomalies, such as deviations from the predefined regimen, arbitrary and varying duration of mode transitions, hardware failures, and other factors. The paper includes a detailed review of several contemporary retrospective (offline) nonparametric methods for detecting multiple changepoints, which refer to sudden changes in the properties of the observed time series occurring at unknown moments. Special attention is given to algorithms and statistical measures that determine the homogeneity of the data and methods for detecting change points. The paper considers approaches based on dynamic programming and sliding window methods. The second part of the paper focuses on the numerical modeling of these methods using characteristic examples of experimental data, including both “simple” and “complex” speed profiles of movement. The analysis conducted allowed us to identify the preferred methods, which will be further evaluated on the complete dataset. Preference is given to methods that ensure the closeness of the markup to a reference one, potentially allow the detection of both boundaries of transient processes, as well as are robust relative to internal parameters.
-
A survey on the application of large language models in software engineering
Компьютерные исследования и моделирование, 2024, т. 16, № 7, с. 1715-1726Large Language Models (LLMs) are transforming software engineering by bridging the gap between natural language and programming languages. These models have revolutionized communication within development teams and the Software Development Life Cycle (SDLC) by enabling developers to interact with code using natural language, thereby improving workflow efficiency. This survey examines the impact of LLMs across various stages of the SDLC, including requirement gathering, system design, coding, debugging, testing, and documentation. LLMs have proven to be particularly useful in automating repetitive tasks such as code generation, refactoring, and bug detection, thus reducing manual effort and accelerating the development process. The integration of LLMs into the development process offers several advantages, including the automation of error correction, enhanced collaboration, and the ability to generate high-quality, functional code based on natural language input. Additionally, LLMs assist developers in understanding and implementing complex software requirements and design patterns. This paper also discusses the evolution of LLMs from simple code completion tools to sophisticated models capable of performing high-level software engineering tasks. However, despite their benefits, there are challenges associated with LLM adoption, such as issues related to model accuracy, interpretability, and potential biases. These limitations must be addressed to ensure the reliable deployment of LLMs in production environments. The paper concludes by identifying key areas for future research, including improving the adaptability of LLMs to specific software domains, enhancing their contextual understanding, and refining their capabilities to generate semantically accurate and efficient code. This survey provides valuable insights into the evolving role of LLMs in software engineering, offering a foundation for further exploration and practical implementation.
A survey on the application of large language models in software engineering
Computer Research and Modeling, 2024, v. 16, no. 7, pp. 1715-1726Large Language Models (LLMs) are transforming software engineering by bridging the gap between natural language and programming languages. These models have revolutionized communication within development teams and the Software Development Life Cycle (SDLC) by enabling developers to interact with code using natural language, thereby improving workflow efficiency. This survey examines the impact of LLMs across various stages of the SDLC, including requirement gathering, system design, coding, debugging, testing, and documentation. LLMs have proven to be particularly useful in automating repetitive tasks such as code generation, refactoring, and bug detection, thus reducing manual effort and accelerating the development process. The integration of LLMs into the development process offers several advantages, including the automation of error correction, enhanced collaboration, and the ability to generate high-quality, functional code based on natural language input. Additionally, LLMs assist developers in understanding and implementing complex software requirements and design patterns. This paper also discusses the evolution of LLMs from simple code completion tools to sophisticated models capable of performing high-level software engineering tasks. However, despite their benefits, there are challenges associated with LLM adoption, such as issues related to model accuracy, interpretability, and potential biases. These limitations must be addressed to ensure the reliable deployment of LLMs in production environments. The paper concludes by identifying key areas for future research, including improving the adaptability of LLMs to specific software domains, enhancing their contextual understanding, and refining their capabilities to generate semantically accurate and efficient code. This survey provides valuable insights into the evolving role of LLMs in software engineering, offering a foundation for further exploration and practical implementation.
-
Отклонения от закона Бенфорда и распознавание авторских особенностей в текстах
Компьютерные исследования и моделирование, 2015, т. 7, № 1, с. 197-201Исследовано распределение первой значащей цифры в числительных связных текстов. Обнаружено, что закон Бенфорда приближенно выполняется для них. Отклонения от закона Бенфорда являются статистически устойчивыми авторскими особенностями, позволяющими при некоторых условиях различить части текста с разным авторством.
Deviation from Benford’s law and identification of author peculiarities in texts
Computer Research and Modeling, 2015, v. 7, no. 1, pp. 197-201Просмотров за год: 4. Цитирований: 6 (РИНЦ).The distribution of the first significant digit in numerals of connected texts is considered. Benford's law is found to hold approximately for them. Deviations from Benford's law are statistically significant author peculiarities that allow, under certain conditions, to distinguish between parts of the text with a different authorship.
-
Модернизация как глобальный процесс: опыт математического моделирования
Компьютерные исследования и моделирование, 2021, т. 13, № 4, с. 859-873В статье проведен анализ эмпирических данных по долгосрочной демографической и экономической динамике стран мира за период с начала XIX века по настоящее время. В качестве показателей, характеризующих долгосрочную демографическую и экономическую динамику стран мира, были выбраны данные по численности населения и ВВП ряда стран мира за период 1500–2016 годов. Страны выбирались таким образом, чтобы в их число вошли представители с различным уровнем развития (развитые и развивающиеся страны), а также страны из различных регионов мира (Северная Америка, Южная Америка, Европа, Азия, Африка). Для моделирования и обработки данных использована специально разработанная математическая модель. Представленная модель является автономной системой дифференциальных уравнений, которая описывает процессы социально-экономической модернизации, в том числе процесс перехода от аграрного общества к индустриальному и постиндустриальному. В модель заложена идея о том, что процесс модернизации начинается с возникновения в традиционном обществе инновационного сектора, развивающегося на основе новых технологий. Население из традиционного сектора постепенно перемещается в инновационный сектор. Модернизация завершается, когда большая часть населения переходит в инновационный сектор.
При работе с моделью использовались статистические методы обработки данных, методы Big Data, включая иерархическую кластеризацию. С помощью разработанного алгоритма на базе метода случайного спуска были идентифицированы параметры модели и проведена ее верификация на основе эмпирических рядов, а также проведено тестирование модели с использованием статистических данных, отражающих изменения, наблюдаемые в развитых и развивающихся странах в период происходящей в течение последних столетий модернизации. Тестирование модели продемонстрировало ее высокое качество — отклонения расчетных кривых от статистических данных, как правило, небольшие и происходят в периоды войн и экономических кризисов. Проведенный анализ статистических данных по долгосрочной демографической и экономической динамике стран мира позволил определить общие закономерности и формализовать их в виде математической модели. Модель будет использоваться с целью прогноза демографической и экономической динамики в различных странах мира.
Ключевые слова: модернизация, страны мира, долгосрочная демографическая и экономическая динамика, математическое моделирование.
Modernization as a global process: the experience of mathematical modeling
Computer Research and Modeling, 2021, v. 13, no. 4, pp. 859-873The article analyzes empirical data on the long-term demographic and economic dynamics of the countries of the world for the period from the beginning of the 19th century to the present. Population and GDP of a number of countries of the world for the period 1500–2016 were selected as indicators characterizing the long-term demographic and economic dynamics of the countries of the world. Countries were chosen in such a way that they included representatives with different levels of development (developed and developing countries), as well as countries from different regions of the world (North America, South America, Europe, Asia, Africa). A specially developed mathematical model was used for modeling and data processing. The presented model is an autonomous system of differential equations that describes the processes of socio-economic modernization, including the process of transition from an agrarian society to an industrial and post-industrial one. The model contains the idea that the process of modernization begins with the emergence of an innovative sector in a traditional society, developing on the basis of new technologies. The population is gradually moving from the traditional sector to the innovation sector. Modernization is completed when most of the population moves to the innovation sector.
Statistical methods of data processing and Big Data methods, including hierarchical clustering were used. Using the developed algorithm based on the random descent method, the parameters of the model were identified and verified on the basis of empirical series, and the model was tested using statistical data reflecting the changes observed in developed and developing countries during the period of modernization taking place over the past centuries. Testing the model has demonstrated its high quality — the deviations of the calculated curves from statistical data are usually small and occur during periods of wars and economic crises. Thus, the analysis of statistical data on the long-term demographic and economic dynamics of the countries of the world made it possible to determine general patterns and formalize them in the form of a mathematical model. The model will be used to forecast demographic and economic dynamics in different countries of the world.
-
Определение автора текста методом сегментации
Компьютерные исследования и моделирование, 2022, т. 14, № 5, с. 1199-1210В работе описывается метод распознавания авторов литературных текстов по близости фрагментов, на которые разделен отдельный текст, к эталону автора. Эталоном является эмпирическое распределение частот буквосочетаний, построенное по обучающей выборке, куда вошли экспертно отобранные достоверно известные произведения данного автора. Совокупность эталонов разных авторов образует библиотеку, внутри которой и решается задача об идентификации автора неизвестного текста. Близость между текстами понимается в смысле нормы в L1 для вектора частот буквосочетаний, который строится для каждого фрагмента и для текста в целом. Автором неизвестного текста назначается тот, эталон которого чаще всего выбирается в качестве ближайшего для набора фрагментов, на которые разделен текст. Длина фрагмента оптимизируется исходя из принципа максимального различия расстояний от фрагментов до эталонов в задаче распознавания «свой–чужой». Тестирование метода проведено на корпусе отечественных и зарубежных (в переводе) авторов. Были собраны 1783 текста 100 авторов суммарным объемом примерно 700 млн знаков. Чтобы исключить тенденциозность отбора авторов, рассматривались авторы, фамилии которых начинались на одну и ту же букву (в данном случае Л). Ошибка идентификации по биграммам составила 12%. Наряду с достаточно высокой точностью данный метод обладает еще одним важным свойством: он позволяет оценить вероятность того, что эталон автора рассматриваемого текста в библиотеке отсутствует. Эта вероятность может быть оценена по результатам статистики ближайших эталонов для малых фрагментов текста. В работе исследуются также статистические цифровые портреты писателей: это совместные эмпирические распределения вероятности того, что некоторая доля текста идентифицируется на заданном уровне доверия. Практическая важность этих статистик в том, что носители соответствующих распределений практически не пересекаются для своих и чужих эталонов, что позволяет распознать эталонное распределение буквосочетаний на высоком уровне доверия.
Ключевые слова: эмпирическое распределение частот, биграммы, идентификация автора, литературный текст, ближайший эталон.
Identification of the author of the text by segmentation method
Computer Research and Modeling, 2022, v. 14, no. 5, pp. 1199-1210The paper describes a method for recognizing authors of literary texts by the proximity of fragments into which a separate text is divided to the standard of the author. The standard is the empirical frequency distribution of letter combinations, built on a training sample, which included expertly selected reliably known works of this author. A set of standards of different authors forms a library, within which the problem of identifying the author of an unknown text is solved. The proximity between texts is understood in the sense of the norm in L1 for the frequency vector of letter combinations, which is constructed for each fragment and for the text as a whole. The author of an unknown text is assigned the one whose standard is most often chosen as the closest for the set of fragments into which the text is divided. The length of the fragment is optimized based on the principle of the maximum difference in distances from fragments to standards in the problem of recognition of «friend–foe». The method was tested on the corpus of domestic and foreign (translated) authors. 1783 texts of 100 authors with a total volume of about 700 million characters were collected. In order to exclude the bias in the selection of authors, authors whose surnames began with the same letter were considered. In particular, for the letter L, the identification error was 12%. Along with a fairly high accuracy, this method has another important property: it allows you to estimate the probability that the standard of the author of the text in question is missing in the library. This probability can be estimated based on the results of the statistics of the nearest standards for small fragments of text. The paper also examines statistical digital portraits of writers: these are joint empirical distributions of the probability that a certain proportion of the text is identified at a given level of trust. The practical importance of these statistics is that the carriers of the corresponding distributions practically do not overlap for their own and other people’s standards, which makes it possible to recognize the reference distribution of letter combinations at a high level of confidence.
Журнал индексируется в Scopus
Полнотекстовая версия журнала доступна также на сайте научной электронной библиотеки eLIBRARY.RU
Журнал входит в систему Российского индекса научного цитирования.
Журнал включен в базу данных Russian Science Citation Index (RSCI) на платформе Web of Science
Международная Междисциплинарная Конференция "Математика. Компьютер. Образование"





