Текущий выпуск Номер 3, 2025 Том 17

Все выпуски

Результаты поиска по 'heterogeneous system':
Найдено статей: 36
  1. Мухартова Ю.В., Мангура П.А., Левашова Н.Т., Ольчев А.В.
    Выбор граничных условий при моделировании процессов турбулентного переноса в приземном слое атмосферы
    Компьютерные исследования и моделирование, 2018, т. 10, № 1, с. 27-46

    Рассмотрены одномерная и двумерная гидродинамические модели турбулентного переноса внутри приземного слоя атмосферы в условиях нейтральной атмосферной стратификации. Обе модели основаны на решении системы усредненных уравнений Навье – Стокса и неразрывности с использованием 1.5-го порядка замыкания, а также уравнений для турбулентной кинетической энергии и скорости ее диссипации. С помощью одномерной модели, применимой в случае однородной подстилающей поверхности, проведено исследование по оценке влияния граничных условий на верхней и нижней границах модельной области на результаты расчетов вертикальных профилей скорости ветра и параметров турбулентности. В предложенной модели граничные условия ставились таким образом, чтобы она была согласована с широко используемой классической одномерной моделью, основанной на логарифмическом распределении скорости ветра по высоте, линейной зависимости коэффициента турбулентного обмена от высоты и постоянстве турбулентной кинетической энергии в приземном слое атмосферы в условиях нейтральной атмосферной стратификации. На основе классической модели можно получить ряд соотношений, связывающих градиент скорости ветра, турбулентную кинетическую энергию и скорость ее диссипации, каждое из которых может быть использовано в качестве граничного условия в гидродинамической модели. Из нескольких возможных вариантов постановки граничных условий для скорости ветра и скорости диссипации турбулентной кинетической энергии выбраны те, при которых достигается наименьшее отклонение смоделированных с помощью гидродинамической модели вертикальных профилей искомых величин от классических распределений. Соответствующие граничные условия на верхней и нижней границах использованы при постановке начально-краевой задачи в двумерной гидродинамической модели, позволяющей учитывать сложную структуру рельефа и горизонтальную неоднородность растительности. На основе предложенной двумерной модели с выбранными оптимальными граничными условиями исследована динамика установления турбулентного потока в зависимости от расстояния при обтекании воздушным потоком опушки леса. Для всех рассмотренных начально-краевых задач разработаны и реализованы безусловно устойчивые неявные разностные схемы их численного решения.

    Muhartova Ju.V., Mangura P.A., Levashova N.T., Olchev A.V.
    Selection of boundary conditions for modeling the turbulent exchange processes within the atmospheric surface layer
    Computer Research and Modeling, 2018, v. 10, no. 1, pp. 27-46

    One- and two-dimensional hydrodynamic models of turbulent transfer within the atmospheric surface layer under neutral thermal stratification are considered. Both models are based on the solution of system of the timeaveraged equations of Navier – Stokes and continuity using a 1.5-order closure scheme as well as equations for turbulent kinetic energy and the rate of its dissipation. The influence of the upper and lower boundary conditions on vertical profiles of wind speed and turbulence parameters within the atmospheric surface layer was derived using an one-dimensional model usually applied in case of an uniform ground surface. The boundary conditions in the model were prescribed in such way that the vertical wind and turbulence patterns were well agreed with widely used logarithmic vertical profile of wind speed, linear dependence of turbulent exchange coefficient on height above ground surface level and constancy of turbulent kinetic energy within the atmospheric surface layer under neutral atmospheric conditions. On the basis of the classical one-dimensional model it is possible to obtain a number of relationships which link the vertical wind speed gradient, turbulent kinetic energy and the rate of its dissipation. Each of these relationships can be used as a boundary condition in our hydrodynamic model. The boundary conditions for the wind speed and the rate of dissipation of turbulent kinetic energy were selected as parameters to provide the smallest deviations of model calculations from classical distributions of wind and turbulence parameters. The corresponding upper and lower boundary conditions were used to define the initial and boundary value problem in the two-dimensional hydrodynamic model allowing to consider complex topography and horizontal vegetation heterogeneity. The two-dimensional model with selected optimal boundary conditions was used to describe the spatial pattern of turbulent air flow when it interacted with the forest edge. The dynamics of the air flow establishment depending on the distance from the forest edge was analyzed. For all considered initial and boundary value problems the unconditionally stable implicit finite-difference schemes of their numerical solution were developed and implemented.

    Просмотров за год: 19.
  2. Способин А.В.
    Бессеточный алгоритм расчета взаимодействия крупных частиц с ударным слоем в сверхзвуковых гетерогенных потоках
    Компьютерные исследования и моделирование, 2022, т. 14, № 5, с. 1007-1027

    Работа посвящена численному моделированию двухфазных течений, а именно расчету сверхзвукового обтекания затупленного тела потоком вязкого газа с примесью относительно крупных частиц, масса которых позволяет после отражения от поверхности выйти за пределы ударного слоя, двигаясь по инерции навстречу набегающему потоку. Натурные и вычислительные эксперименты показывают, что движение высокоинерционных частиц существенным образом изменяет структуру течения газа в ударном слое, а формирующиеся при этом направленные на тело импактные струи вызывают увеличение давления газа вблизи участков поверхности и кратный рост конвективного теплового потока.

    Построена математическая модель обтекания затупленного тела сверхзвуковым потоком вязкого газа с твердыми частицами. Решение системы нестационарных уравнений Навье–Стокса в консервативных переменных осуществляется бессеточным методом, в основе которого лежит аппроксимация частных пространственных производных газодинамических величин и содержащих их функций методом наименьших квадратов на множестве распределенных в области расчета узлов. Расчет невязких потоков выполняется методом HLLC в сочетании с MUSCL-реконструкцией третьего порядка, вязких потоков — схемой второго порядка. МНК-аппроксимация частных производных параметров газа по направлению также применяется для реализации краевых условий Неймана на выходной границе области расчета, а также поверхностях обтекаемых тел, которые считаются изотермическими твердыми стенками.

    Каждое движущееся тело окружено облаком расчетных узлов, принадлежащих его домену и перемещающихся вместе с ним в пространстве. Реализовано два подхода к моделированию перемещения объектов с учетом обратного влияния на течение газа: метод скользящих облаков фиксированной формы и эволюции единого облака узлов, представляющего собой объединение узлов разных доменов. Проведенные численные эксперименты подтвердили применимость предложенных методов к решению целевых задач моделирования движения крупных частиц в сверхзвуковом потоке.

    Выполнена программная реализация представленных алгоритмов на основе технологии параллельных гетерогенных вычислений OpenCL. Представлены результаты моделирования движения крупной частицы вдоль оси симметрии сферы навстречу набегающему потоку с числом Маха $\mathrm{M}=6$.

    The work is devoted to numerical modeling of two-phase flows, namely, the calculation of supersonic flow around a blunt body by a viscous gas flow with an admixture of large high inertia particles. The system of unsteady Navier – Stokes equations is numerically solved by the meshless method. It uses the cloud of points in space to represent the fields of gas parameters. The spatial derivatives of gas parameters and functions are approximated by the least square method to calculate convective and viscous fluxes in the Navier – Stokes system of equations. The convective fluxes are calculated by the HLLC method. The third-order MUSCL reconstruction scheme is used to achieve high order accuracy. The viscous fluxes are calculated by the second order approximation scheme. The streamlined body surface is represented by a model of an isothermal wall. It implements the conditions for the zero velocity and zero pressure gradient, which is also modeled using the least squares method.

    Every moving body is surrounded by its own cloud of points belongs to body’s domain and moving along with it in space. The explicit three-sage Runge–Kutta method is used to solve numerically the system of gas dynamics equations in the main coordinate system and local coordinate systems of each particle.

    Two methods for the moving objects modeling with reverse impact on the gas flow have been implemented. The first one uses stationary point clouds with fixed neighbors within the same domain. When regions overlap, some nodes of one domain, for example, the boundary nodes of the particle domain, are excluded from the calculation and filled with the values of gas parameters from the nearest nodes of another domain using the least squares approximation of gradients. The internal nodes of the particle domain are used to reconstruct the gas parameters in the overlapped nodes of the main domain. The second method also uses the exclusion of nodes in overlapping areas, but in this case the nodes of another domain take the place of the excluded neighbors to build a single connected cloud of nodes. At the same time, some of the nodes are moving, and some are stationary. Nodes membership to different domains and their relative speed are taken into account when calculating fluxes.

    The results of modeling the motion of a particle in a stationary gas and the flow around a stationary particle by an incoming flow at the same relative velocity show good agreement for both presented methods.

  3. Уткин П.С., Чупров П.А.
    Численное моделирование распространения зондирующих импульсов в плотной засыпке гранулированной среды
    Компьютерные исследования и моделирование, 2024, т. 16, № 6, с. 1361-1384

    Необходимость моделирования высокоскоростных течений сжимаемых сред с ударными волнами при наличии плотных завес или слоев частиц со значительным объемным содержанием дисперсной фазы возникает при изучении различных процессов. В качестве примера можно привести диспергирование частиц из слоя за проходящей ударной волной или распространение волн горения в компактных зарядах гетерогенных взрывчатых веществ. Хотя данные направления успешно развиваются в течение последних нескольких десятков лет, соответствующие математические модели и вычислительные алгоритмы активно совершенствуются вплоть до настоящего времени, поскольку механизмы волновых процессов в двухфазной среде, реализующиеся в различных моделях, отличаются друг от друга.

    Статья посвящена численному исследованию распространения возмущений внутри плотной засыпки песка, вызванных последовательным воздействием ударной волны, падающей по нормали к поверхности засыпки из воздуха. Постановка задачи следует натурным опытам А.Т. Ахметова с соавторами. Целью работы является объяснение возможных причин усиления сигнала на датчике давления внутри засыпки, которое наблюдается в опытах при некоторых условиях. Математическая модель основана на одномерной системе уравнений Баера – Нунциато для описания плотных течений двухфазных сред с учетом межгранулярных напряжений в фазе частиц. Вычислительный алгоритм основан на методе Годунова для уравнений Баера – Нунциато.

    В статье описана волновая динамика вне засыпки частици внутри нее после воздействия на засыпку первого и второго импульсов давления из газа. Основными элементами течения внутри засыпки являются фильтрационная волна в газовой фазе и волна компактирования в фазе частиц. В результате интерференции волны компактирования, вызванной первым падающим импульсом давления и отраженной от стенки ударной трубы, и фильтрационной волны, вызванной вторым падающим импульсом, происходит усиление сигнала на датчике давления внутри засыпки. Таким образом, дано возможное объяснение данного нового эффекта, наблюдаемого в натурных экспериментах.

    Utkin P.S., Chuprov P.A.
    Numerical simulation of the propagation of probing pulses in a dense bed of a granular medium
    Computer Research and Modeling, 2024, v. 16, no. 6, pp. 1361-1384

    The need to model high-speed flows of compressible media with shock waves in the presence of dense curtains or layers of particles arises when studying various processes, such as the dispersion of particles from a layer behind a shock wave or propagation of combustion waves in heterogeneous explosives. These directions have been successfully developed over the past few decades, but the corresponding mathematical models and computational algorithms continue to be actively improved. The mechanisms of wave processes in two-phase media differ in different models, so it is important to continue researching and improving these models.

    The paper is devoted to the numerical study of the propagation of disturbances inside a sand bed under the action of successive impacts of a normally incident air shock wave. The setting of the problem follows the experiments of A. T.Akhmetov with co-authors. The aim of this study is to investigate the possible reasons for signal amplification on the pressure sensor within the bed, as observed under some conditions in experiments. The mathematical model is based on a one-dimensional system of Baer –Nunziato equations for describing dense flows of two-phase media taking into account intergranular stresses in the particle phase. The computational algorithm is based on the Godunov method for the Baer – Nunziato equations.

    The paper describes the dynamics of waves inside and outside a particle bed after applying first and second pressure pulses to it. The main components of the flow within the bed are filtration waves in the gas phase and compaction waves in the solid phase. The compaction wave, generated by the first pulse and reflected from the walls of the shock tube, interacts with the filtration wave caused by the second pulse. As a result, the signal measured by the pressure sensor inside the bed has a sharp peak, explaining the new effect observed in experiments.

  4. Житнухин Н.А., Жадан А.Ю., Кондратов И.В., Аллахвердян А.Л., Граничин О.Н., Петросян О.Л., Романовский А.В., Харин В.С.
    Многоагентный протокол локального голосования для онлайнового планирования DAG
    Компьютерные исследования и моделирование, 2025, т. 17, № 1, с. 29-44

    Планирование вычислительных рабочих процессов, представленных направленными ациклическими графами (DAG), имеет ключевое значение для многих областей информатики, таких как облачные/edge задачи с распределенной рабочей нагрузкой и анализ данных. Сложность онлайнового планирования DAG усугубляется большим количеством вычислительных узлов, задержками передачи данных, неоднородностью (по типу и вычислительной мощности) исполнителей, ограничениями предшествования, накладываемыми DAG, и неравномерностью поступления задач. В данной статье представлен мультиагентный протокол локального голосования (MLVP) — новый подход, ориентированный на динамическое распределение нагрузки при планировании DAG в гетерогенных вычислительных средах, где исполнители представлены в виде агентов. MLVP использует протокол локального голосования для достижения эффективного распределения нагрузки, формулируя проблему как дифференцированное достижение консенсуса. Алгоритм вычисляет агрегированную метрику DAG для каждой пары исполнитель – узел на основе зависимостей между узлами, доступности узлов и производительности исполнителей. Баланс этих метрик как взвешенная сумма оптимизируется с помощью генетического алгоритма для вероятностного распределения задач, что позволяет добиться эффективного распределения рабочей нагрузки за счет обмена информацией и достижения консенсуса между исполнителями всей системы и, таким образом, улучшить время выполнения. Эффективность MLVP демонстрируется путем сравнения с современным алгоритмом планирования DAG и популярными эвристиками, такими как DONF, FIFO, Min-Min и Max-Min. Численное моделирование показывает, что MLVP достигает улучшения makepsan до 70% на определенных топологиях графов и среднего сокращения makepan на 23,99% по сравнению с DONF (современная эвристика планирования DAG) на случайно сгенерированном разнообразном наборе DAG. Примечательно, что масштабируемость алгоритма подтверждается ростом производительности при увеличении числа исполнителей и узлов графа.

    Zhitnukhin N.A., Zhadan A.Y., Kondratov I.V., Allahverdyan A.L., Granichin O.N., Petrosian O.L., Romanovskii A.V., Kharin V.S.
    Multi-agent local voting protocol for online DAG scheduling
    Computer Research and Modeling, 2025, v. 17, no. 1, pp. 29-44

    Scheduling computational workflows represented by directed acyclic graphs (DAGs) is crucial in many areas of computer science, such as cloud/edge tasks with distributed workloads and data mining. The complexity of online DAG scheduling is compounded by the large number of computational nodes, data transfer delays, heterogeneity (by type and processing power) of executors, precedence constraints imposed by DAG, and the nonuniform arrival of tasks. This paper introduces the Multi-Agent Local Voting Protocol (MLVP), a novel approach focused on dynamic load balancing for DAG scheduling in heterogeneous computing environments, where executors are represented as agents. The MLVP employs a local voting protocol to achieve effective load distribution by formulating the problem as a differentiated consensus achievement. The algorithm calculates an aggregated DAG metric for each executor-node pair based on node dependencies, node availability, and executor performance. The balance of these metrics as a weighted sum is optimized using a genetic algorithm to assign tasks probabilistically, achieving efficient workload distribution via information sharing and reaching consensus among the executors across the system and thus improving makespan. The effectiveness of the MLVP is demonstrated through comparisons with the state-of-the-art DAG scheduling algorithm and popular heuristics such as DONF, FIFO, Min- Min, and Max-Min. Numerical simulations show that MLVP achieves makepsan improvements of up to 70% on specific graph topologies and an average makespan reduction of 23.99% over DONF (state-of-the-art DAG scheduling heuristic) across randomly generated diverse set of DAGs. Notably, the algorithm’s scalability is evidenced by enhanced performance with increasing numbers of executors and graph nodes.

  5. Демьянов А.Ю., Динариев О.Ю., Лисицын Д.А.
    Моделирование частотной зависимости диэлектрической проницаемости и электрической проводимости насыщенных пористых сред
    Компьютерные исследования и моделирование, 2016, т. 8, № 5, с. 765-773

    В работе представлена численная методика определения спектральных электромагнитных характеристик (эффективных электрической проводимости и относительной диэлектрической проницаемости) насыщенных пористых сред. Их определение находит применение при интерпретации данных петрофизических исследований скважин, а также при изучении кернового материала. Особенностью настоящей работы является использование трехмерных цифровых моделей насыщенных пористых сред, построенных на основе комбинированной информации о микроструктуре среды и капиллярном равновесии двухфазной смеси типа «нефть–вода» в поровом пространстве. Данные о микроструктуре модели получаются путем использования методов рентгеновской микротомографии. Многофазное многокомпонентное распределение флюидов в поровом пространстве модели находится с помощью метода функционала плотности. Для определения непосредственно электромагнитных характеристик модели выполняется фурье-преобразование по времени уравнения Максвелла, выражающего обобщенную теорему Ампера о циркуляции. В низкочастотном приближении задача сводится к решению уравнения эллиптического типа на комплексный потенциал. Для конечно- разностной аппроксимации используется дискретизация модели на изотропной равномерной ортогональной сетке. При этом считается, что в каждой расчетной ячейке сетки содержится либо вода, либо нефть, либо по- рода со своими электрическими параметрами. Для этого выполняется процедура сегментации, в результате которой в модели отсутствуют ячейки, содержащие несколько фаз (нефть–вода). Подобная модификация модели позволяет избежать использования сложноструктурированных расчетных сеток, а также дает возможность исключить влияние способа задания свойств ячеек, заполненных смесью различных фаз, на результаты расчета. Полученная система разностных уравнений решается с использованием стабилизированного метода бисопряженных градиентов с многосеточным предобуславливателем. На основе вычисленных распределений комплексного потенциала находятся средние значения электрической проводимости и относительной диэлектрической проницаемости. Для простоты в настоящей работе рассматривался случай отсутствия спектральной зависимости проводимости и проницаемости компонентов от частоты. Результаты расчетов частотных зависимостей эффективных характеристик неоднородно насыщенных пористых сред (электрической проводимости и относительной диэлектрической проницаемости) в широком диапазоне частот и водонасыщенностей представлены на графиках и в таблице. В заключение делается вывод об эффективности предложенного подхода для задачи определения дисперсионных электромагнитных характеристик насыщенных горных пород.

    Demianov A.Y., Dinariev O.Y., Lisitsin D.A.
    Numerical simulation of frequency dependence of dielectric permittivity and electrical conductivity of saturated porous media
    Computer Research and Modeling, 2016, v. 8, no. 5, pp. 765-773

    This article represents numerical simulation technique for determining effective spectral electromagnetic properties (effective electrical conductivity and relative dielectric permittivity) of saturated porous media. Information about these properties is vastly applied during the interpretation of petrophysical exploration data of boreholes and studying of rock core samples. The main feature of the present paper consists in the fact, that it involves three-dimensional saturated digital rock models, which were constructed based on the combined data considering microscopic structure of the porous media and the information about capillary equilibrium of oil-water mixture in pores. Data considering microscopic structure of the model are obtained by means of X-ray microscopic tomography. Information about distributions of saturating fluids is based on hydrodynamic simulations with density functional technique. In order to determine electromagnetic properties of the numerical model time-domain Fourier transform of Maxwell equations is considered. In low frequency approximation the problem can be reduced to solving elliptic equation for the distribution of complex electric potential. Finite difference approximation is based on discretization of the model with homogeneous isotropic orthogonal grid. This discretization implies that each computational cell contains exclusively one medium: water, oil or rock. In order to obtain suitable numerical model the distributions of saturating components is segmented. Such kind of modification enables avoiding usage of heterogeneous grids and disregards influence on the results of simulations of the additional techniques, required in order to determine properties of cells, filled with mixture of media. Corresponding system of differential equations is solved by means of biconjugate gradient stabilized method with multigrid preconditioner. Based on the results of complex electric potential computations average values of electrical conductivity and relative dielectric permittivity is calculated. For the sake of simplicity, this paper considers exclusively simulations with no spectral dependence of conductivities and permittivities of model components. The results of numerical simulations of spectral dependence of effective characteristics of heterogeneously saturated porous media (electrical conductivity and relative dielectric permittivity) in broad range of frequencies and multiple water saturations are represented in figures and table. Efficiency of the presented approach for determining spectral electrical properties of saturated rocks is discussed in conclusion.

    Просмотров за год: 8.
  6. Петров И.Б.
    Application of the grid-characteristic method for mathematical modeling in dynamical problems of deformable solid mechanics
    Компьютерные исследования и моделирование, 2019, т. 11, № 6, с. 1041-1048

    The grid-characteristic method is a promising numerical method for solving hyperbolic systems of equations, e.g., equations describing elastic and acoustic waves. This method has high precision and allows physically correct simulations of wave processes in heterogeneous media. The grid-characteristic method makes it possible to correctly take into account boundary conditions and conditions on surfaces with different physical characteristics. The method offers the greatest advantages for one-dimensional equations, especially in combination with a fixed difference grid, as in conventional grid-based methods. However, in the multidimensional case using the algorithms of splitting with respect to spatial variables, the author has managed to preserve its positive qualities. The use of the method of Runge–Kutta type, or the integro-interpolation method for hyperbolic equations makes it possible to effectively carry out a generalization of methods developed for linear equations, in the nonlinear case, in particular, to enforce the difference analogs of the conservation laws, which is important for shock-capturing, for example, discontinuous solutions. Based on the author’s variant of the grid-characteristic method, several important problems of seismic prospecting, seismic resistance, global seismic studies on Earth and Mars, medical applications, nondestructive testing of railway lines, the simulation of the creation and characteristics of composite materials for the aerospace industry and other areas of practical application were numerically solved. A significant advantage of the constructed method is the preservation of its stability and precision at the strains of the environment. This article presents the results of a numerical solution based on the grid-characteristic method to the problem of modeling elastic-plastic deformation in traumatic brain injury.

  7. Ступицкий Е.Л., Андрущенко В.А.
    Физические исследования, численное и аналитическое моделирование взрывных явлений. Обзор
    Компьютерные исследования и моделирование, 2020, т. 12, № 3, с. 505-546

    В данном обзоре рассмотрен широкий круг явлений и задач, связанных с взрывом. Подробные численные исследования позволили обнаружить интересный физический эффект — образование дискретных вихревых структур сразу за фронтом ударной волны, распространяющейся в плотных слоях неоднородной атмосферы. Показана необходимость дальнейшего исследования такого рода явлений и определения степени их связи с возможным развитием газодинамической неустойчивости. Дан краткий анализ многочисленных работ по тепловому взрыву метеороидов при их высокоскоростном движении в атмосфере Земли. Большое внимание уделено разработке численного алгоритма для расчета одновременного взрыва нескольких фрагментов метеороидов и проанализированы особенности развития такого газодинамического течения. Показано, что разработанные раннее алгоритмы для расчета взрывов могут успешно использоваться для исследования взрывных вулканических извержений. В работе представлены и обсуждаются результаты таких исследований как для континентальных, так и для подводных вулканов с определенными ограничениями на условия вулканической активности.

    В работе выполнен математический анализ и представлены результаты аналитических исследований ряда важных физических явлений, характерных для взрывов высокой удельной энергии в ионосфере. Показано, что принципиальное значение для разработки достаточно полных и адекватных теоретических и численных моделей таких сложных явлений, как мощные плазменные возмущения в ионосфере, имеет предварительное лабораторное физическое моделирование основных процессов, определяющих эти явления. Показано, что наиболее близким объектом для такого моделирования является лазерная плазма. Приведены результаты соответствующих теоретических и экспериментальных исследований и показана их научная и практическая значимость. Дан краткий обзор работ последних лет по использованию лазерного излучения для лабораторного физического моделирования процессов воздействия ядерного взрыва на астроидные материалы.

    В результате выполненного в обзоре анализа удалось выделить и предварительно сформулировать некоторые интересные и весомые в научном и прикладном отношении вопросы, которые необходимо исследовать на основе уже полученных представлений: это мелкодисперсные химически активные системы, образующиеся при выбросе вулканов; маломасштабные вихревые структуры; генерация спонтанных магнитных полей из-за развития неустойчивости и их роль в трансформации энергии плазмы при ее разлете в ионосфере. Важное значение имеет также вопрос об исследовании возможного лабораторного физического моделирования теплового взрыва тел при воздействии высокоскоростного плазменного потока, который до настоящего времени имеет лишь теоретические толкования.

    Stupitsky E.L., Andruschenko V.A.
    Physical research, numerical and analytical modeling of explosion phenomena. A review
    Computer Research and Modeling, 2020, v. 12, no. 3, pp. 505-546

    The review considers a wide range of phenomena and problems associated with the explosion. Detailed numerical studies revealed an interesting physical effect — the formation of discrete vortex structures directly behind the front of a shock wave propagating in dense layers of a heterogeneous atmosphere. The necessity of further investigation of such phenomena and the determination of the degree of their connection with the possible development of gas-dynamic instability is shown. The brief analysis of numerous works on the thermal explosion of meteoroids during their high-speed movement in the Earth’s atmosphere is given. Much attention is paid to the development of a numerical algorithm for calculating the simultaneous explosion of several fragments of meteoroids and the features of the development of such a gas-dynamic flow are analyzed. The work shows that earlier developed algorithms for calculating explosions can be successfully used to study explosive volcanic eruptions. The paper presents and discusses the results of such studies for both continental and underwater volcanoes with certain restrictions on the conditions of volcanic activity.

    The mathematical analysis is performed and the results of analytical studies of a number of important physical phenomena characteristic of explosions of high specific energy in the ionosphere are presented. It is shown that the preliminary laboratory physical modeling of the main processes that determine these phenomena is of fundamental importance for the development of sufficiently complete and adequate theoretical and numerical models of such complex phenomena as powerful plasma disturbances in the ionosphere. Laser plasma is the closest object for such a simulation. The results of the corresponding theoretical and experimental studies are presented and their scientific and practical significance is shown. The brief review of recent years on the use of laser radiation for laboratory physical modeling of the effects of a nuclear explosion on asteroid materials is given.

    As a result of the analysis performed in the review, it was possible to separate and preliminarily formulate some interesting and scientifically significant questions that must be investigated on the basis of the ideas already obtained. These are finely dispersed chemically active systems formed during the release of volcanoes; small-scale vortex structures; generation of spontaneous magnetic fields due to the development of instabilities and their role in the transformation of plasma energy during its expansion in the ionosphere. It is also important to study a possible laboratory physical simulation of the thermal explosion of bodies under the influence of highspeed plasma flow, which has only theoretical interpretations.

  8. Суров В.С.
    Многомерный узловой метод характеристик для гиперболических систем
    Компьютерные исследования и моделирование, 2021, т. 13, № 1, с. 19-32

    Предложен многомерный узловой метод характеристик, предназначенный для интегрирования гиперболических систем, базирующийся на расщеплении исходной системы уравнений на ряд одномерных подсистем, для расчета которых использован одномерный узловой метод характеристик. Приведены расчетные формулы, детально описана методика вычислений применительно к односкоростной модели гетерогенной среды при наличии сил гравитации. Представленный метод применим и к другим гиперболическим системам уравнений. С помощью этого явного, неконсервативного, первого порядка точности метода рассчитан ряд тестовых задач и показано, что в рамках предлагаемого подхода за счет привлечения дополнительных точек в шаблон схемы возможно проведение вычислений с числами Куранта, превышающими единицу. Так, в расчете обтекания трехмерной ступеньки потоком гетерогенной смеси число Куранта равнялось 1.2. В случае применения метода Годунова при решении этой же задачи макси- мальное число Куранта, при котором возможен устойчивый счет, имеет значение 0.13 × 10−2. Еще одна особенность многомерного метода характеристик связана со слабой зависимостью временного шага от размерности задачи, что существенно расширяет возможности этого подхода. С использованием этого метода рассчитан ряд задач, которые ранее считались «тяжелыми» для таких численных методов, как методы Годунова, Куранта – Изаксона – Рис, что связано с тем, что в нем наиболее полно использованы преимущества характеристического представления интегрируемой системы уравнений.

    Surov V.S.
    Multidimensional nodal method of characteristics for hyperbolic systems
    Computer Research and Modeling, 2021, v. 13, no. 1, pp. 19-32

    Disclosed is a multidimensional nodal method of characteristics, designed to integrate hyperbolic systems, based on splitting the initial system of equations into a number of one-dimensional subsystems, for which a onedimensional nodal method of characteristics is used. Calculation formulas are given, the calculation method is described in detail in relation to a single-speed model of a heterogeneous medium in the presence of gravity forces. The presented method is applicable to other hyperbolic systems of equations. Using this explicit, nonconservative, first-order accuracy of the method, a number of test tasks are calculated and it is shown that in the framework of the proposed approach, by attracting additional points in the circuit template, it is possible to carry out calculations with Courant numbers exceeding one. So, in the calculation of the flow of the threedimensional step by the flow of a heterogeneous mixture, the Courant number was 1.2. If Godunov’s method is used to solve the same problem, the maximum number of Courant, at which a stable account is possible, is 0.13 × 10-2. Another feature of the multidimensional method of characteristics is the weak dependence of the time step on the dimension of the problem, which significantly expands the possibilities of this approach. Using this method, a number of problems were calculated that were previously considered “heavy” for the numerical methods of Godunov, Courant – Isaacson – Rees, which is due to the fact that it most fully uses the advantages of the characteristic representation of the system of equations.

  9. Павлов П.А.
    Математические модели и методы организации вычислений в мультипроцессорных системах
    Компьютерные исследования и моделирование, 2025, т. 17, № 3, с. 423-436

    В работе предложена и исследована математическая модель распределенной вычислительной системы параллельных взаимодействующих процессов, конкурирующих за использование ограниченного числа копий структурированного программного ресурса. В случаях неограниченного и ограниченного параллелизма по числу процессоров мультипроцессорной системы решены задачи определения оперативных и точных значений времени выполнения неоднородных и одинаково распределенных конкурирующих процессов в синхронном режиме, при котором обеспечивается линейный порядок выполнения блоков структурированного программного ресурса внутри каждого из процессов без задержек. Полученные результаты можно использовать при сравнительном анализе математических соотношений для вычисления времени реализации множества параллельных распределенных взаимодействующих конкурирующих процессов, математическом исследовании эффективности и оптимальности организации распределенных вычислений, решении задач построения оптимальной компоновки блоков одинаково распределенной системы, нахождения оптимального числа процессоров, обеспечивающих директивное время выполнения заданных объемов вычислений. Предложенные модели и методы открывают новые перспективы при решении проблем оптимального распределения ограниченных вычислительных ресурсов, синхронизации множества взаимодействующих конкурирующих процессов, минимизации системных затрат при выполнении параллельных распределенных процессов.

    Pavlov P.A.
    Mathematical models and methods for organizing calculations in SMP systems
    Computer Research and Modeling, 2025, v. 17, no. 3, pp. 423-436

    The paper proposes and investigates a mathematical model of a distributed computing system of parallel interacting processes competing for the use of a limited number of copies of a structured software resource. In cases of unlimited and limited parallelism by the number of processors of a multiprocessor system, the problems of determining operational and exact values of the execution time of heterogeneous and identically distributed competing processes in a synchronous mode are solved, which ensures a linear order of execution of blocks of a structured software resource within each of the processes without delays. The obtained results can be used in a comparative analysis of mathematical relationships for calculating the implementation time of a set of parallel distributed interacting competing processes, a mathematical study of the efficiency and optimality of the organization of distributed computing, solving problems of constructing an optimal layout of blocks of an identically distributed system, finding the optimal number of processors that provide the directive execution time of given volumes of computations. The proposed models and methods open up new prospects for solving problems of optimal distribution of limited computing resources, synchronization of a set of interacting competing processes, minimization of system costs when executing parallel distributed processes.

  10. Быков Н.В.
    Моделирование кластерного движения беспилотных транспортных средств в гетерогенном транспортном потоке
    Компьютерные исследования и моделирование, 2022, т. 14, № 5, с. 1041-1058

    Одной из особенностей беспилотных автомобильных транспортных средств является их способность к организованному движению в форме кластеров: последовательности движущихся с единой скоростью транспортных средств. Влияние образования и движения этих кластеров на динамику транспортных потоков представляет большой интерес. В настоящей работе предложена качественная имитационная модель кластерного движения беспилотных транспортных средств в гетерогенной транспортной системе, состоящей из двух типов агентов (транспортных средств): управляемых человеком и беспилотных. В основу описания временной эволюции системы положены правила 184 и 240 для элементарных клеточных автоматов. Управляемые человеком транспортные средства перемещаются по правилу 184 с добавлением случайного торможения, вероятность которого зависит от расстояния до находящегося впереди транспортного средства. Для беспилотных транспортных средств используется комбинация правил, в том числе в зависимости от типа ближайших соседей, в некоторых случаях независимо от расстояния до них, что привносит в модель нелокальное взаимодействие. При этом учтено, что группа последовательно движущихся беспилотных транспортных средств может сформировать организованный кластер. Исследовано влияние соотношения типов транспортных средств в системе на характеристики транспортного потока при свободномд вижении на круговой однополосной и двухполосной дорогах, а также при наличии светофора. Результаты моделирования показали, что эффект образования кластеров имеет существенное влияние при свободномдвиж ении, а наличие светофора снижает положительный эффект приблизительно вдвое. Также исследовано движение кластеров из беспилотных автомобилей на двухполосных дорогах с возможностью перестроения. Показано, что учет при перестроении беспилотными транспортными средствами типов соседних транспортных средств (беспилотное или управляемое человеком) положительно влияет на характеристики транспортного потока.

    Bykov N.V.
    A simulation model of connected automated vehicles platoon dynamics in a heterogeneous traffic flow
    Computer Research and Modeling, 2022, v. 14, no. 5, pp. 1041-1058

    The gradual incorporation of automated vehicles into the global transport networks leads to the need to develop tools to assess the impact of this process on various aspects of traffic. This implies a more organized movement of automated vehicles which can form uniformly moving platoons. The influence of the formation and movement of these platoons on the dynamics of traffic flow is of great interest. The currently most developed traffic flow models are based on the cellular automaton approach. They are mainly developed in the direction of increasing accuracy. This inevitably leads to the complication of models, which in their modern form have significantly moved away from the original philosophy of cellular automata, which implies simplicity and schematicity of models at the level of evolution rules, leading, however, to a complex organized behavior of the system. In the present paper, a simulation model of connected automated vehicles platoon dynamics in a heterogeneous transport system is proposed, consisting of two types of agents (vehicles): human-driven and automated. The description of the temporal evolution of the system is based on modified rules 184 and 240 for elementary cellular automata. Human-driven vehicles move according to rule 184 with the addition of accidental braking, the probability of which depends on the distance to the vehicle in front. For automated vehicles, a combination of rules is used depending on the type of nearest neighbors, regardless of the distance to them, which brings non-local interaction to the model. At the same time, it is considered that a group of sequentially moving connected automated vehicles can form an organized platoon. The influence of the ratio of types of vehicles in the system on the characteristics of the traffic flow during free movement on a circular one-lane and two-lane roads, as well as in the presence of a traffic light, is studied. The simulation results show that the effect of platoon formation is significant for a freeway traffic flow; the presence of a traffic light reduces the positive effect by about half. The movement of platoons of connected automated vehicles on two-lane roads with the possibility of lane changing was also studied. It is shown that considering the types of neighboring vehicles (automated or human-driven) when changing lanes for automated vehicles has a positive effect on the characteristics of the traffic flow.

Страницы: следующая последняя »

Журнал индексируется в Scopus

Полнотекстовая версия журнала доступна также на сайте научной электронной библиотеки eLIBRARY.RU

Журнал включен в базу данных Russian Science Citation Index (RSCI) на платформе Web of Science

Международная Междисциплинарная Конференция "Математика. Компьютер. Образование"

Международная Междисциплинарная Конференция МАТЕМАТИКА. КОМПЬЮТЕР. ОБРАЗОВАНИЕ.